Cedar Shakes and Shingles

CERTI-SPLIT HAND-SPLIT AND RE-SAWN CEDAR SHAKE ROOFING NUMBER 1 GRADE

Cedar Shakes and  Shingles

Our Cedar Shakes and Shingles HAVE SPLIT FACES AND SAWN BACKS. CEDAR LOGS ARE FIRST CUT INTO DESIRED LENGTHS. BLANKS OR BOARDS OF PROPER THICKNESS ARE SPLIT AND THEN RUN DIAGONALLY THROUGH A BAND SAW TO PRODUCE TWO TAPERED SHAKES FROM EACH BLANK.

  • 5 bundles to a square based on a 10 inch exposure
  • #1 Blue label – Non Bureau
  • Thickness 1/2″ (medium) and 3/4″ (heavy) minimums
  • Width 4″ minimum
  • Roof exposure 10 inch maximum
  • Clear heartwood; 20% maximum flat grain in each bundle
  • Minimum purchase: 5 bundles
Cedar*Treated Certi-LastPrice
1/2” x 24” Medium$65.00
3/4” x 24” Heavy$75.00
1/2” x 24” Medium CCA$75.00
3/4” x 24” Heavy CCA$85.00

HIP AND RIDGE UNITS

CERTI-RIDGE SHINGLE HIP AND RIDGE UNITS ARE PRE-MANUFACTURED LABOR SAVING CAPS FOR HIPS AND RIDGES. THES PRODUCTS ARE MADE FROM THE SAME RED CEDAR RESOURCE AS CERTI-LABEL SHINGLES FOR A HIGH QUALITY PERFECT MATCH.

NUMBER 1 GRADE BLUE LABEL- MANUFACTURED FROM QUALITY NUMBER 1 GRADE, BLUE LABEL CEDAR SHINGLES. WIDTHS 7″ MINIMUM (MEASURED OVER THE TOP AT THE BUTT END).

EACH BUNDLE COVERS 16.67 LINEAL FEET

Cedar*Treated Cert-Last
$75.00$80.00

#4 Undercourse Shingles – Covers 33 lineal feet per Bundle

Starter-CedarStarter-*Treated Certi-Last
$40.00$75.00

*The Certi-Last label identifies red cedar shakes and shingles which have been pressure impregnated with wood preservatives to the standards of the Cedar Shake & Shingle Bureau.

Certi-Last is manufactured using Certi-Split cedar shakes, Certigrade cedar shingles and Certi-Sawn cedar shakes.

Application- Shakes and shingles are applied according to standard specifications of the Cedar Shake & Shingle Bureau. The treating company or chemical manufacturer may have special requirements regarding flashing, fasteners, etc.

Cedar Shingles – $75 per bundle

Cedar Shakes and Shingles- Before and After

Certigrade Red Cedar Shingles-This type of smooth sawn architecturally uniform cedar shingle is perferred for its natural and tailored appearance and is used on traditional and modern residential and non-residential structures. For use on roofs and sidewalls.

  • Number 2 grade, Red Label Perfections
  • 18″ length
  • Thickness is 5/2 1/4″
  • Width 4″ minimum
  • Face must be 11″ clear or better
  • Limited sapwood and flat grain allowed
  • Limited knots and defects allowed above the clear portion
  • Coverage: 4 bundles per square based on a 5 1/2″ exposure
  • Minimum purchase: 5 bundles

Certigrade Cedar Sidewall Shingles- also known as R&R products, manufactured from Number 1 Grade Label Certigrade red cedar shingles, machine re-trimmed for parallel edges and with smooth butts sawn at right angles where a uniform appearance is desired. They are primarily used for sidewall applications.

  • 4″ width minimum
  • 5/2 1/4″ thick
  • Clear heartwood: 100% edge grain; no defects

18″ R&R Natural    $250.00 per box
18″ R&R Grooved   $250.00 per box

Coverage: Box covers 100 square feet based on 14″ exposure

Installation and maintenance guide

Please contact us for more information.